Chapter 3 How to Use the Operator Panel
29
Indications for LED Indicators
Check
Indicator
Power
Indicator
Description
Off
On
Ready to start scanning.
Indicates that the initialization was
successfully completed after the scanner is
turned on.
This status is referred to as "ready status".
In ready status, the Check indicator is off and
the Power indicator is lit.
The indicators are in the same state in power
saving mode.
On
On
Indicates that a temporary error occurred
during a scan.
The Check indicator lights up.
The Power indicator remains lit.
For more details about the errors, refer to
Press the [Scan/Stop] button in this status to
return to the ready status.
Flashing
On
or
flashing
Indicates that a device error (alarm) occurred
during an initialization or a scan.
The Check indicator flashes.
The Power indicator remains lit or flashes.
For more details about the errors, refer to
Press the [Scan/Stop] button in this status to
return to the ready status.
When this alarm occurs, turn the power off
then back on. If the problem still persists,
contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
