Fujitsu ETERNUS LT20 S2 Installing, Starting Up And Maintaining Download Page 23

Page: 23 / 118

ETERNUS LT20 S2

Installing the Tape Library

Rack Mounting the Tape Library

3.5.2

Installing the Library in a Rack

Different Rackmount Kits

Note that there are 3 different rackmount rails:

Figure 10: 3 different rackmount rails

1. PRIMECENTER rackmount rail for ETERNUS LT20 / LT40 / LT60 S2

A Torx screwdriver is requested. A counternut is entered in the 2. hole in the
rack of ETERNUS LT20 or in the 4. hole in the rack of ETERNUS LT40/60.

2. Standard rackmount rail for ETERNUS LT20 S2

The counternuts are already integrated, the screws are fixed with the help of
a Phillips screwdriver.

3. Standard rackmount rail for ETERNUS LT40 / LT60 S2

The counternuts are already integrated, the screws are fixed with the help of
a Phillips screwdriver in the 4. hole.

The library easily installs into a standard 19" rack system taking up 1U of space.

Summary of Contents for ETERNUS LT20 S2























































































































Search results

Summary of Contents for ETERNUS LT20 S2

Reviews:

Related manuals for ETERNUS LT20 S2

Brands by name

Popular brands

Fujitsu ETERNUS LT20 S2, Installing, Starting Up And Maintaining

Search results

Summary of Contents for ETERNUS LT20 S2

Reviews:

Related manuals for ETERNUS LT20 S2

Brands by name

Popular brands