10
Operating Manual
ETERNUS JX40 S2
Target Group
Introduction
© c
o
g
n
it
as
. Ges
e
lls
c
h
ft
fü
r
T
e
c
hnik
-Dok
u
ment
at
ion mbH 2015
Pf
ad:
C:
\Us
e
rs
\guda
t\
Doc
u
ment
s
\___
___F
T
S
\_
ST
O
R
A
G
E\
J
X
40_
S2\
F
M\
s
x
4
0
-ba
-en\
s
x
40
-ba-en
.k
01
1.1
Target Group
The operating instructions are intended for the person responsible for installing
the hardware and correctly operating the system. The operating instructions
contain all the descriptions which are of importance for commissioning your
ETERNUS JX40 S2 storage subsystem in so far as they do not form part of the
publication of your server system.
To understand the different expansion options it is necessary to have a
knowledge of hardware and data transmission, as well as basic knowledge of
the operating system used.
1.2
Structure of the Manual
The ETERNUS JX40 S2 storage subsystem manual describes how to install
and configure the subsystem and perform expansions or upgrades.
You will find further information in the documentation of your PRIMERGY server.
This manual consists of the following chapters:
●
Important Notes
This chapter contains instructions on the safe operation of your storage
subsystem as well as information about environmental protection.
●
Operating and Indicator Elements
This chapter gives a detailed description of the operating panel and the
connecting elements on the rear panel of the corresponding storage
subsystem.
●
Hard Disk Drives
This chapter describes in detail how the hot-plug hard disk drives must be
dealt with.
●
Connections
This chapter describes the SAS and the mains connection.
The possibilities of supplying the storage subsystem with mains voltage are
also described.
●
Configurations
This part of the manual gives configuration examples.
