ETERNUS JX40 S2
Operating Manual
25
Installation
Installing the Storage Subsystem in the Rack
3.3
Installing the ETERNUS JX40 S2 in the
Rack
V
CAUTION!
●
Please observe the safety precautions and references to mounting
into the rack in
chapter "Important Notes" on page 15
●
At least two people are needed to position the server in the rack. (For
the Japanese market, please refer to manual “
安全上のご注意
”.
●
For safety reasons, no more than one unit may be withdrawn from the
rack at any one time during installation and maintenance work. There
is a danger that the rack will tilt forward.
●
Ensure that the anti-tilt bracket is correctly mounted when you set up
the rack. Online documentation for Rack Tilting Protection can be
found on
http://manuals.ts.fujitsu.com/index.php?id=5406-5605-5606
.
3.3.1
Requirements of the Rack
The PRIMECENTER (M1) Rack systems from Fujitsu with a depth of 1050 mm
support the installation of the subsystem. For the installation in 3rd-Party racks,
please ask your customer service.
To accommodate the ventilation concept and ensure proper ventilation of the
components in the rack, any unused areas must be closed using dummy covers.
Power is supplied via the socket strips available in the rack.
Fujitsu Rack Systems
The main features of PRIMECENTER Rack, DataCenter Rack and 19-inch
standard rack (for the Japanese market) are as follows:
●
support systems that can be mounted without tools
●
support systems having a linear alignment feature to ensure that they can
be adjusted to different rack depths
The PRIMECENTER Rack provides an enhanced cable management in the
lateral rack area. The mounting of the rails in the different racks is described in
the next sections. Installation of the cable management is described in detail in
the Technical Manual for the rack.
