ETERNUS JX40 S2
Operating Manual
19
Important Notes
Notes on Mounting the Rack
responsibility of the user. The use of shielded I/O cables is required when
connecting this equipment to any and all optional peripheral or host
devices. Failure to do so may violate FCC and ICES rules.
W
WARNING
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
2.5
Notes on Mounting the Rack
●
For safety reasons, at least two people are required to install the rack-
mounted model because of its weight and size. (For the Japanese market,
please refer to manual “
安全上のご注意
”.)
●
When connecting and disconnecting cables, observe the notes in the
operating manual of your PRIMERGY system and the comments in the
“Important notes” chapter in the technical manual supplied with the rack.
●
Ensure that the anti-tilt bracket is correctly mounted when you set up the
rack.
●
For safety reasons, no more than one unit may be withdrawn from the rack
at any one time during installation and maintenance work. There is a danger
that the rack will tilt forward.
●
The power supply to the rack must be installed by an authorized specialist
(electrician).
2.6
Notes on Transportation
I
Transport the storage subsystem in its original packaging or in other
suitable packaging which will protect it against shock or impact.
Do not unpack it until all transport maneuvers are completed.
If you need to lift or transport the storage subsystem, ask someone to
help you.
