Fujitsu Eternus DX500 S3, Configuration Manual

Page: 143 / 151

■
Configuration Procedure
Perform the required settings for Eco-mode. These settings can be performed with either ETERNUS SF Storage
Cruiser or ETERNUS Web GUI.
To set the visualization of power consumption and temperature, use ETERNUS SF Storage Cruiser. ETERNUS SF
Storage Cruiser obtains power consumption of the ETERNUS DX for "power consumption" and ambient tem-
perature (intake air temperature for the fans) for "temperature".
●
Required Environment
ETERNUS SF Storage Cruiser is required to visualize (graphically display) the power consumption and temper-
ature.
●
Configuration Procedure
Eco-mode
Perform the following settings with the operation management server (ETERNUS SF Storage Cruiser) or ETER-
NUS Web GUI:
•
Eco-mode setup
Enable the Eco-mode for the ETERNUS DX.
•
Eco-mode schedule setup
Set the schedule to apply Eco-mode. Register the time period to turn on the disk motors or turn on the disk
power for backups as well as the RAID group that contains these target disks.
Visualization of the power consumption and the temperature
Register the ETERNUS DX storage systems that are the targets for performance management in the operation
management server (ETERNUS SF Storage Cruiser).
For more details on the settings for ETERNUS SF Storage Cruiser, refer to "ETERNUS SF Storage Cruiser Opera-
tion Guide".
Chapter 9 Solution Configuration
9.3 Green
143
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0