Password: root (by default)
After logging in, the Initial Setup screen of ETERNUS Web GUI appears.
3.3
Storage Management (Initial Setup 1)
Perform the settings that are required before operation of the ETERNUS DX by using the Initial Setup 1 screen
of ETERNUS Web GUI.
Perform the following settings according to the wizard screen:
•
Set Storage System Name
•
Change User Password
•
Set Thin Provisioning
•
Register SED Authentication Key
•
Setup Network Environment
The procedure for initial setup is shown below. For details on the settings, refer to "Configuration Guide (Web
GUI)".
Chapter 3 General Settings
3.3 Storage Management (Initial Setup 1)
40
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0
Summary of Contents for Eternus DX500 S3
Page 2: ...This page is intentionally left blank ...
Page 151: ......
