Register the business server (ETERNUS SF AdvancedCopy Manager agent) and the business volumes that are
to be backed up in the operation management server (ETERNUS SF AdvancedCopy Manager manager).
REC related settings and connection path settings must be performed in the ETERNUS DX.
●
Required Environment
ETERNUS SF AdvancedCopy Manager agent and a gateway device (that connects the storage systems) must
be installed in each operation site and backup site. ETERNUS SF AdvancedCopy Manager manager must be
installed in either of the sites (one ETERNUS SF AdvancedCopy Manager manager can manage the ETERNUS
SF AdvancedCopy Manager agents of both sites).
●
Configuration Procedure
•
Settings for the ETERNUS DX
Register the following information with ETERNUS Web GUI.
-
Host interface settings
Set the port mode of the host interface to RA or CA/RA.
-
Copy table size settings
Set a memory area to manage the REC progress.
-
Copy path settings
Set the information of the copy paths between the storage systems to perform an REC. Confirm that the
storage systems can communicate with each other after setting of the copy paths is complete.
-
REC buffer settings
This setting is required when an REC is performed in the Consistency mode. The Consistency mode guar-
antees the order of data transfers to the connection destination storage system for all of the specified
REC sessions.
-
REC disk buffer registration
Set the REC disk buffer when REC buffer capacity is to be expanded.
•
Settings for ETERNUS SF AdvancedCopy Manager
Register the following information in the operation management server (ETERNUS SF AdvancedCopy Man-
ager).
-
Registration of the ETERNUS SF AdvancedCopy Manger license
Register a license key via the ETERNUS SF Web Console or ETERNUS SF CLI.
-
Business server registration
Register the server in which the ETERNUS SF AdvancedCopy Manager agent is running as the business
server in the operation management server.
-
Registration of the device information in the server that is the management target
Register the device information in the server that is the management target to the operation manage-
ment server.
-
Settings for replication
Register the replication source volumes and the replication destination volumes.
For more details on the settings for ETERNUS SF AdvancedCopy Manager, refer to "ETERNUS SF AdvancedCopy
Manager Operation Guide".
Chapter 9 Solution Configuration
9.1 Continuous Business
135
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0
Summary of Contents for Eternus DX500 S3
Page 2: ...This page is intentionally left blank ...
Page 151: ......
