Fujitsu ESPRIMO P5635 Operating Manual Download Page 58

Page: 58 / 70

System upgrades

A26361-K1006-Z220-1-7619, edition 2

Installing and removing the hard disk drive

Removing a hard disk drive

►

Open the casing (see "

Opening the casing

").

►

Fold up the drive cage (see "

Opening the drive cage

").

►

Disconnect all cables connected to the drive (data cable, power supply cable).

►

Slightly press together the EasyChange rails mounted on the hard disk (1) and pull the hard
disk drive out of the drive cage in the direction of the arrow (2).

►

Pull the EasyChange rails off the hard disk
drive.

►

If you no longer need the EasyChange rails,
secure them again at their location in the
drive cage.

It may be necessary to modify the entry for the drive in the

BIOS Setup

Summary of Contents for ESPRIMO P5635







































































Search results

Summary of Contents for ESPRIMO P5635

Reviews:

Related manuals for ESPRIMO P5635

Brands by name

Popular brands

Fujitsu ESPRIMO P5635, Operating Manual

Search results

Summary of Contents for ESPRIMO P5635

Reviews:

Related manuals for ESPRIMO P5635

Brands by name

Popular brands