Fujitsu ESPRIMO P5635 Operating Manual Download Page 36

Page: 36 / 70

Troubleshooting and tips

A26361-K1006-Z220-1-7619, edition 2

Cause

Troubleshooting

Wrong monitor has been set under
Window XP

►

Restart the device.

►

Press

while the system is booting.

Either the

Windows Advanced Start Options

menu or the

menu for selecting the operating system appears.

►

If the menu for selecting the operating system
appears, press

►

Select

Safe Mode

Safe Mode with Network

►

Set the correct values for the connected monitor as
described in the operating manual of the monitor by
selecting

Start -

Settings -

Control Panel - Display

and

then the

Appearance

Themes

Settings

tabs.

Wrong setting for the monitor under
Windows Vista

►

Restart the device.

►

Press

while the system is booting.

Either the

Windows Advanced Start Options

menu or the

menu for selecting the operating system appears.

►

If the menu for selecting the operating system
appears, press

►

Select

Safe Mode

Safe Mode with Network

►

Set the correct values for the connected monitor, as
described in the operating manual of the monitor, by
selecting

Start (Settings) - Control Panel - Display -

Settings

Wrong setting for the monitor under
Windows 7

►

Restart the device.

►

Press

while the system is booting.

Either the

Windows Advanced Start Options

menu or the

menu for selecting the operating system appears.

►

If the menu for selecting the operating system
appears, press

►

Select

Safe Mode

Safe Mode with Network

►

Select

Start – Control Panel – Appearance and Themes

– Display

to set the correct values for the connected

monitor, as explained in the monitor instructions.

The wrong RAM memory modules
have been inserted.

►

See the manual for the mainboard for information on
which memory modules can be used.

Summary of Contents for ESPRIMO P5635







































































Search results

Summary of Contents for ESPRIMO P5635

Reviews:

Related manuals for ESPRIMO P5635

Brands by name

Popular brands

Fujitsu ESPRIMO P5635, Operating Manual

Search results

Summary of Contents for ESPRIMO P5635

Reviews:

Related manuals for ESPRIMO P5635

Brands by name

Popular brands