Fujitsu Esprimo D5210 User Manual Download

Page: 50 / 53

POINT

Store the removed slot cover in a safe place.

When using an expansion card after removed, install so that dust does not enter the internal
personal computer.

Insert the expansion card into the port.

Firmly insert the expansion card into the port and secure it by returning the lock raised in Step 4.

Install the installing fitting.

Vertically install so that the tab is firmly positioned on the back side.

Install the upper cover and connect LAN and modular cables.

10 Insert the power plug into a wall outlet, and then turn on the computer.

The device driver and resource are automatically set so that the expansion card can be used.

POINT

Store the removed slot cover in a safe place. After removing an expansion card, reinstall the
slot cover so that dust does not enter the internals of the computer.

Summary of Contents for Esprimo D5210






















































Search results

Summary of Contents for Esprimo D5210

Reviews:

Related manuals for Esprimo D5210

Brands by name

Popular brands

Fujitsu Esprimo D5210, User Manual

Search results

Summary of Contents for Esprimo D5210

Reviews:

Related manuals for Esprimo D5210

Brands by name

Popular brands