Fujitsu ESPRIMO C7 Series Operating Manual Download Page 53

Page: 53 / 60

System expansions

Removing boards

►

Open the casing (see

"Opening the casing", Page 34

►

Remove the heat sink (see

"Removing the heat sink", Page 50

►

If necessary, unplug any cables which
are connected to the board.

►

If you are installing a PCI Express x16
card: Release the board.

►

Remove the board from the casing (1).

►

If you do not want to install a new
board, reinstall the slot cover.

►

Slide the slot cover downward into the
rear panel of the casing (1).

►

Reinstall the heat sink (see

"Installing

the heat sink", Page 50

►

Close the casing (see

"Closing the

casing", Page 35

If you have installed or removed a PCI board, check the relevant PCI
slot settings in the BIOS Setup. Change the settings as required. Further
information is provided in the PCI board documentation.

Fujitsu

Summary of Contents for ESPRIMO C7 Series





























































Search results

Summary of Contents for ESPRIMO C7 Series

Reviews:

Related manuals for ESPRIMO C7 Series

Brands by name

Popular brands

Fujitsu ESPRIMO C7 Series, Operating Manual

Search results

Summary of Contents for ESPRIMO C7 Series

Reviews:

Related manuals for ESPRIMO C7 Series

Brands by name

Popular brands