Fujitsu ESPRIMO C7 Series Operating Manual Download Page 49

Page: 49 / 60

System expansions

Installing/removing a SmartCard reader (optional)

Operation of this module is not permitted in Taiwan.

In systems equipped with a SmartCard reader, access can be restricted to those
users who have a corresponding SmartCard.

Installing the SmartCard reader

SmartCardreader

►

Open the casing (see

"Opening the casing", Page 34

►

Break out the web at the SmartCard opening on the front cover.

►

Remove the drive cage (see

"Removing

the drive cage", Page 37

)

►

Slide the SmartCard reader into the
bay provided for it (1) and secure it
with the two screws (2).

►

Make sure that the SmartCard reader
is also between the two brackets.
Otherwise, you will not be able to insert
the SmartCard from outside.

►

Connect the cable for the SmartCard reader to the mainboard and the SmartCard
reader. Refer to the manual for the mainboard.

►

Install the drive cage again (see

"Installing the drive cage", Page 38

►

Close the casing (see

"Closing the casing", Page 35

Removing the SmartCard reader

SmartCardreader

►

Open the casing (see

"Opening the casing", Page 34

►

Remove the drive cage (see

"Removing

the drive cage", Page 37

)

►

Disconnect the SmartCard connector
from the mainboard. Refer to the
manual for the mainboard.

►

Loosen the screws (1).

►

Pull the SmartCard reader out of the bay (2).

►

Install the drive cage again (see

"Installing

the drive cage", Page 38

►

Close the casing (see

"Closing the

casing", Page 35

Fujitsu

Summary of Contents for ESPRIMO C7 Series





























































Search results

Summary of Contents for ESPRIMO C7 Series

Reviews:

Related manuals for ESPRIMO C7 Series

Brands by name

Popular brands

Fujitsu ESPRIMO C7 Series, Operating Manual

Search results

Summary of Contents for ESPRIMO C7 Series

Reviews:

Related manuals for ESPRIMO C7 Series

Brands by name

Popular brands