System expansions
Installing the drive cage
Drive cage
►
Open the casing (see
"Opening the casing", Page 34
).
2
1
►
Push the drive cage at an angle into
the casing mounts (1).
►
If a drive is present, connect the connector
of the data and power supply cables (2).
►
Close the drive cage.
►
Close the casing (see
"Closing the
casing", Page 35
).
Installing and removing the accessible 5
1
/
4
inch drive
Removing an accessible drive
►
Open the casing (see
"Opening the casing", Page 34
).
►
Remove the drive cage (see
"Removing the drive cage", Page 37
).
1
1
1
2
►
Remove the screws from the drive cage (1).
►
Take the drive out of the drive cage (2).
►
Install the drive cage again (see
"Installing
the drive cage", Page 38
).
►
If you do not want to install a new drive, you
must re
fi
t the plastic drive cover again (see
"Installing the plastic drive cover", Page 37
).
►
Close the casing (see
"Closing the casing", Page 35
).
38
Fujitsu
Summary of Contents for ESPRIMO C7 Series
Page 1: ...System Operating Manual ESPRIMO C7xx C9xx ...
Page 3: ......
