manualshive.com logo in svg

Fujitsu DL7600, User Manual

Share
Download
Fujitsu DL7600 User Manual Download Page 13

 

 
User's Manual 

 

ix 

Notes on Safety 

„

 WARNING 

 

  WARNING 

 

 

 

Do not place a container containing water, such as a vase, potted plant, and drinking glass, 
or a metal object on or near the printer. 

Otherwise, electric shock or fire may result. 

Do not place the printer in a humid or dusty area, in an area with explosive fumes, an area 
with poor ventilation or close to a fire. 

Otherwise, electric shock or fire may result. 

Use only one of the power cords included with this product, for this product.  Do not use 
any other power cord for this product. 

Otherwise, electric shock or fire may result. 

 

 

 

Do not use this product in an area exposed to a high level of moisture, such as a bathroom 
and shower room. 

Otherwise, electric shock or fire may result. 

 

 

 

 

Summary of Contents for DL7600






























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands