manualshive.com logo in svg

Fujitsu CELVIN NAS QE705, Operating Manual, Page: 61 / 75

Share
Download
Fujitsu CELVIN NAS QE705 Operating Manual Download Page 61

 

NAS maintenance

 

Fujitsu 

55 

EuP mode configuration (for compliance with legal 
standby requirements) 

The EU directive 2009/125/EC defines ecodesign requirements for energy-related products. In order 
to comply with this directive, the EuP mode needs to be activated. 

►

 

Activate EuP mode under 

Control Panel - System Settings - Power

. 

When EuP mode is enabled, the following settings will be affected so that the server maintains low 
power consumption (less than 0.5W) when the server is powered off: 

●

 

Wake on LAN: Disabled. 

●

 

AC power resumption: The server will remain off after the power restores from an outage. 

●

 

Schedule power on/ off/ restart settings: Disabled. 

If EuP mode is deactivated, the power consumption of the server is greater than 0.5W when 
switched off. EuP is disabled by default so that you can use the functions Wake on LAN, AC power 
resumption, and power schedule settings properly. 
 

Summary of Contents for CELVIN NAS QE705












































































Reviews:

No comments