Installing the NAS
Fujitsu
13
LED Display & System Status Overview
LED Colour LED-Status
Description
Flashes green
and red
alternately every
0.5 sec
●
The hard disk drive on the NAS is being
formatted.
●
The NAS is being initialized.
●
The system firmware is being updated.
●
RAID rebuilding is in process.
●
Online RAID capacity expansion is in
process.
●
Online RAID level migration is in process.
Red
●
The hard disk drive is invalid.
●
The disk volume has reached its full
capacity.
●
The disk volume is going to be full.
●
The system fan is out of function.
●
An error occurs when accessing (read/write)
the disk data.
●
A bad sector is detected on the hard disk
drive.
●
The NAS is in degraded read-only mode
(2 member hard drives fail in a RAID 5 or
RAID 6 configuration, the disk data can still
be read).
●
(Hardware self-test error).
Flashes red
every 0.5 sec
The NAS is in degraded mode (one member hard
drive fails in RAID 1, RAID 5 or RAID 6
configuration).
Flashes green
every 0.5 sec
●
The NAS is starting up.
●
The NAS is not configured.
●
The hard disk drive is not formatted.
Green
The NAS is ready.
System
Status
Red
/
Green
Off
All the hard disk drives on the NAS are in
standby mode.
Orange
The NAS is connected to the network.
LAN
Orange
Flashes orange
The NAS is being accessed from the network.
Flashes red
The disk data is being accessed and a read/write
error occurs during the process.
Red
A hard drive read/write error occurs.
Flashes green
The disk data is being accessed.
HDD
Red
/
Green
Green
The hard drive can be accessed.
Summary of Contents for CELVIN NAS QE705
Page 1: ...Operating Manual System CELVIN NAS ...
Page 3: ......