Fujitsu CELSIUS R920 Operating Manual Download

Page: 68 / 80

System expansions

Do not throw away the slot cover. For cooling, protection against

re and in order to

comply with EMC regulations, you must re

t the slot cover if you remove the board.

►

Push the board into the slot (1).

►

Swivel the retaining clamp back again until you feel it click into place (2).

►

If necessary, connect the cables to the board.

►

For display adapters with an additional power connection (< 65 W): attach the
display adapter power cable to the power supply.

If you have installed or removed a board, please check the relevant slot
settings in the

BIOS Setup

. If necessary, change the settings. Further

information is provided in the board documentation.

Fujitsu Technology Solutions

Summary of Contents for CELSIUS R920

















































































Search results

Summary of Contents for CELSIUS R920

Reviews:

Related manuals for CELSIUS R920

Brands by name

Popular brands

Fujitsu CELSIUS R920, Operating Manual

Search results

Summary of Contents for CELSIUS R920

Reviews:

Related manuals for CELSIUS R920

Brands by name

Popular brands