Fujitsu CELSIUS R920 Operating Manual Download

Page: 33 / 80

Troubleshooting and tips

Cause

Remedy

Wrong monitor has been set under Window XP

►

Restart the device.

►

Press

while the system is booting.

Either the

Windows Advanced Start Options

or the menu for selecting the operating system
appears.

►

If the menu for selecting the operating
system appears, press

►

Select

Safe Mode

Safe Mode with Network

►

Go to

Start – Settings – Control Panel – Display

and the tabs

Appearance

Themes

Settings

to set the correct values for the connected
monitor as described in the operating
manual of the monitor.

Wrong monitor has been set under Windows 7

►

Restart the device.

►

Press

while the system is booting.

Either the

Windows Advanced Start Options

or the menu for selecting the operating system
appears.

►

If the menu for selecting the operating
system appears, press the

key.

►

Select

Safe Mode

Safe Mode with Network

►

Go to

Start – Control Panel – Appearance

and Personalization – Display

to enter the

correct values for the connected monitor as
described in the operating manual of the
monitor.

No mouse pointer displayed on the screen

Cause

Remedy

The mouse is not correctly connected.

►

Shut down your operating system in the
proper manner, for instance using

Ctrl

Alt

Del

►

Switch the device off.

►

Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.

►

Make sure that only one mouse is
connected.

►

Switch the device on.

Fujitsu Technology Solutions

Summary of Contents for CELSIUS R920

















































































Search results

Summary of Contents for CELSIUS R920

Reviews:

Related manuals for CELSIUS R920

Brands by name

Popular brands

Fujitsu CELSIUS R920, Operating Manual

Search results

Summary of Contents for CELSIUS R920

Reviews:

Related manuals for CELSIUS R920

Brands by name

Popular brands