Fujitsu CELSIUS H5511 Operating Manual Download Page 52

Page: 52 / 80

Security functions

Assigning the supervisor and user passwords

► Start the

BIOS Setup Utility

and go to the

Security

menu.

► Select the

Set Supervisor Password

ﬁeld and press the Enter key.

With

Enter new Password

: you are asked to enter a password.

► Enter the password and press the Enter key.

Con

rm new Password

requires you to conﬁrm the password.

► Enter the password again and press the Enter key.

Changes have been saved

is a conﬁrmation that the new password has been saved.

► To set the user password, select

Set User Password

and proceed exactly as

when conﬁguring the supervisor password.

If you do not want to change any other settings, you can exit

BIOS Setup Utility

► In the

Exit

menu, select the option

Save Changes & Exit

► Select

Yes

and press the Enter key.

Password

Supervisorpassword

Userpassword

The notebook is then rebooted and the new password comes into effect. It will now be necessary
to ﬁrst enter your supervisor or user password in order to open the

BIOS Setup Utility

. Please

note that the user password only provides access to a few of the BIOS settings.

Changing the supervisor or user password

You can only change the supervisor password when you have logged into the

BIOS Setup Utility

with the supervisor password.

Password

Supervisorpassword

Userpassword

► Call the

BIOS Setup Utility

and go to the

Security

menu.

► When changing the password, proceed exactly as for password assignment.

Removing passwords

To remove a password (without setting a new password) perform the following steps:

Password

Supervisorpassword

Userpassword

► Start the

BIOS Setup Utility

and go to the

Security

menu.

► Highlight the

Set Supervisor Password

Set User Password

ﬁeld and press the Enter key.

You will be requested to enter the current password by the

Enter Current Password

prompt.

You will be requested to enter a new password by the

Enter New Password

prompt.

► Press the Enter key twice.
► In the

Exit

menu, select the option

Save Changes & Exit

► Select

Yes

and press the Enter key.

The notebook will now reboot with the password removed.
Removing the supervisor password simultaneously deactivates the user password.

Fujitsu

Summary of Contents for CELSIUS H5511

















































































Search results

Summary of Contents for CELSIUS H5511

Reviews:

Related manuals for CELSIUS H5511

Brands by name

Popular brands

Fujitsu CELSIUS H5511, Operating Manual

Search results

Summary of Contents for CELSIUS H5511

Reviews:

Related manuals for CELSIUS H5511

Brands by name

Popular brands