Fujitsu BX620 User Manual Download

Page: 58 / 98

158

5.2

Installing the BACS2

If [Broadcom Control Suite 2] is not displayed in the "Control Panel", install BACS2 according to the
following installation procedures:

Ensure that this product is installed in the Server Blade before installing BACS2.

Before you begin the installation, close all applications, windows, or dialog boxes.

To use TCP/IP Offload Engine (TOE), you must have Windows Server 2003 with Scalable
Networking Pack (SNP)

The installer checks if SNP for Windows Server 2003 is installed on the machine.

If it is installed, the installer installs the NDIS 5.2 driver, which is necessary in order to
use TOE. If SNP for Windows Server 2003 is not installed on the machine,
the installer will install the NDIS 5.1 driver, a user cannot use TOE.

Get the Broadcom Control Suite from

the ServerStart CD-ROM included with the

BX620 S4 server blade

and install.

If using Broadcom, refer to the operation manual or help file included with the driver.

Summary of Contents for BX620



































































































Search results

Summary of Contents for BX620

Reviews:

Related manuals for BX620

Brands by name

Popular brands

Fujitsu BX620, User Manual

Search results

Summary of Contents for BX620

Reviews:

Related manuals for BX620

Brands by name

Popular brands