Fujitsu BX620 User Manual Download

Page: 86 / 98

186

5.5.3 Using Expert Mode

Use Expert Mode to create a team, modify a team, add a VLAN, and configure LiveLink for a Smart
Load Balance and Failover team. To create a team using the wizard, refer to "5.5.2 Creating and
Modifying a Team Using the Teaming Wizard" (

pg.177). To switch to the Teaming Wizard from

the BACS2 "Tools" menu, click "Customize". Select the "Default Teaming Mode" tab and select
"Wizard Mode".

Creating a Team

Enabling Dynamic Host Configuration Protocol (DHCP) is not recommended for members
of an SLB type of team.

Click the BACS2 "Tools" menu

→

"Create a Team".

The wizard's Welcome screen appears.

To work without the wizard, click "Expert Mode".

If you want to always use Expert Mode to create a team, check "Default to Expert
Mode on next start". Click [Next].

Summary of Contents for BX620



































































































Search results

Summary of Contents for BX620

Reviews:

Related manuals for BX620

Brands by name

Popular brands

Fujitsu BX620, User Manual

Search results

Summary of Contents for BX620

Reviews:

Related manuals for BX620

Brands by name

Popular brands