background image

En-9

AIR CONDITIONER Wall Mounted Type

OPERATING MANUAL

General Informations on Operation

Auto-restart function

In event of power interruption such as a blackout, the air 

conditioner stops once. But it restarts automatically and 

performs previous operation when the power supply is resumed.

If any power interruption occurs after the timer is set, counting 

down of the timer will be reset. 

After the power supply is resumed, the TIMER indicator on the 

indoor unit blinks to notify you that there has been a timer fault. 

In such a case, reset the timer for your opportune time.

Malfunctions caused by other electrical devices:

Use of other electrical appliances such as an electric shaver or 

nearby use of a wireless radio transmitter may cause the malfunction 

of the air conditioner. 

If you encounter such a malfunction, turn off the circuit breaker once. 

Then turn it on again, and resume operation by using the remote 

controller.

Wired remote controller (option)

The optional wired remote controller can be used.

When you use remote controller, there are following different points 

as compared with using wireless remote controller.

[The additional functions for wired remote controller]

• Temperature set back timer
And you can use both wired and wireless remote controller 

simultaneously. (But function is limited.)

When the restricted functions on the remote controller are used, 

beeping sound will be heard, OPERATION, TIMER and the 

ECONOMY indicator of the indoor unit will flash.

[The restricted functions for wireless remote controller]

<Polar 3-core wired remote controller>

• Outdoor unit low noise

• Energy saving

• Powerful

• Timer operation

<Non-polar 2-core wired remote controller>

• Outdoor unit low noise

• Weekly timer

• Powerful

Temperature and Humidity Range

Permissible ranges of temperature and humidity are as follows:

COOL/DRY

Indoor temperature

About 18 °C to 32 °C

Indoor humidity

Below approximately 80%.

If the air conditioner is used continuously for many 

hours, water may condense on the surface and drip.

If the unit is used under higher temperature conditions than those noted here, the automatic protection circuit may operate, interrupting the operation.

If the unit is used under lower temperature conditions than those noted here, the heat exchanger may freeze, causing water leakage or other mal-

function.

  Do not use the air conditioner for any purpose other than room cooling/dry or fan.

  For the permissible ranges of temperature and humidity for the outdoor unit, refer to the outdoor unit installation manual.

Summary of Contents for ASTG30CMTA













Reviews: