Fujitsu ARTC72LATU, Operating Manual

Page: 23 / 40

En-22
5
For [Valid hour], applicable time slot for the Auto-off
timer can be set.
Set the time with the [Cursor button (Up/Down)], and
press the [Enter button].
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Enable
120 min.
Start End
Mo 10:00
00 6 0:00
Weekly timer On timer
Cancel: OK:
Notes
Counting down of the Auto-off timer is valid only if the
•
air conditioning operation has been started with the
[On/Off button] of this remote controller. When Auto-off
timer become active, following message is displayed
on the screen.
Menu
Auto-off timer start
Even if the valid hour is ended during Auto-off timer is
•
working, the function will work after the set time in [Stop
in] elapsed.
The timer started counting down within the valid hour
•
of the function, even if the current time is being out of
the valid hour during the counting down, the function
works.
If the air conditioning operation is On by Weekly timer
•
after counting down of Auto-off timer has started, the
Auto-off timer will not work.
When you return to the “Monitor” screen, and current time is
within the valid hour, the icon is displayed as follows.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Cool
Monitor
High
°C
26
Menu
Auto-off timer
Mo 10:00
End:
If the current time is out of the valid hour, the icon will be dis-
played as follows:
Monitor
Auto-off timer
Mo 10:00
Displayed icon color and the message differs by the condition
as follows:
Current time is within the valid hour, and the operation has
•
been started by pressing the [On/Off button]:
When the Auto-off timer is enabled, white icon on black back-
ground and the message balloon with the remaining time until
the timer expires are displayed.
Cool
Monitor
High
°C
26
Menu
Auto-off timer: Remaining 120 minutes
Mo 10:00
End:
9374379866_OM_EN.indd 22 17/12/2014 13:19:31