
Before using the terminal
34
・
Data transfered from the other device to a microSD card may
not be displayed or played on the terminal. Data transfered
from the terminal to a microSD card may not be displayed or
played on other devices.
✔
INFORMATION
・
A microSDXC card can be used only SDXC devices. Inserting
a microSDXC card into a device that does not support SDXC
may damage or destroy the data saved on the microSDXC
card. Do not insert one. If you want to reuse a microSDXC
card on which data is destroyed, format the microSDXC card
(all data will be erased) on an SDXC device.
・
When copying data to/from a non-SDXC-compatible device,
use a microSDHC card or microSD card complying with
standards of device to share data.
・
When using an application handling large amount of data
such as video recording, use a high-speed microSD card
(Class 10 or more is recommended).
・
For speed class of microSD card, up to Class 10 can be
available.
・
The terminal supports up to UHS Class 3 speed microSD
card.
◆
Installing/Removing microSD card
・
Install/remove after turning off the power.
・
Be sure to use the slot cap when inserting a microSD card.
Installing of a microSD card alone may cause a malfunction.
■
Installing
a
Face the display side of the terminal up, put your fingertip
into the groove and then open the slot cap
b
Draw the slot cap in the direction of the arrow straight and
horizontally
→
c
With the metal side facing down, set the microSD card into
the slot cap.
・
Be sure to fit the microSD card into the slot cap so as not
to shift.
d
Check that the display side of the terminal faces up and
then insert the slot cap in the direction of the arrow
straight and horizontally
→
e
Firmly press the slot cap to close
→