background image

2

AUTOMATIC OPERATION

*

HEAT & COOL MODEL (REVERSE CYCLE)

Merely press the START/STOP button, and the unit will
begin automatic operation in either the Heating, Cooling
or Monitor modes as appropriate, in accordance with the
thermostat setting and the actual temperature of the
room.

COOLING MODEL

Merely press the START/STOP button, and the unit will
begin automatic operation in the Cooling or Monitor
modes as appropriate, in accordance with the thermo-
stat setting and the actual temperature of the room.

SLEEP TIMER

*

HEAT & COOL MODEL (REVERSE CYCLE)

When the SLEEP timer button is pressed during Heating
mode, the air conditioner’s thermostat setting is gradu-
ally lowered during the period of operation; during Cool-
ing or Dry mode, the thermostat setting is gradually
raised during the period of operation. When the set time
is reached, the unit automatically turns off.

COOLING MODEL

When the SLEEP timer button is pressed during Cooling
or Dry mode, the thermostat setting is gradually raised
during the period of operation. When the set time is
reached, the unit automatically turns off.

WIRELESS REMOTE CONTROL UNIT

The WIRELESS REMOTE CONTROL UNIT allows convenient
control of air conditioner operation.

OMNI-DIRECTIONAL AIR FLOW
(SWING OPERATION)

Three-dimensional control over air direction swing is possi-
ble through dual use of both an UP/DOWN air direction swing
and RIGHT/LEFT air direction swing. Since UP/DOWN air
direction flaps operate automatically according to the oper-
ating mode of the unit, it is possible to set air direction based
on the operating mode.

FEATURES AND FUNCTIONS

REMOVABLE INTAKE GRILLE

The indoor unit’s INTAKE GRILLE can be removed for easy
cleaning and maintenance.

MILDEW-RESISTANT FILTER

The AIR FILTER has been treated to resist mildew growth,
thus allowing cleaner use and easier care.

SUPER QUIET OPERATION

When the FAN CONTROL button is used to select QUIET,
the unit begins super-quiet operation; the indoor unit’s air-
flow is reduced for quieter operation.

AIR CLEANING FILTER

The air cleaning filter (Model UTR-FB09-2) and Deodorant
filter (Model UTR-FB09-1) use an electrostatic principle to
clean the air of fine particulate matter such as tobacco smoke
and plant pollen.

Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).

Summary of Contents for AOT24LMADL





















Reviews: