En-17
• Wiring arrangement
Binder (Medium/Accessories)
Bind with this cable.
• Use 7 pins for receiver unit cable.
• At first, connect the receiver unit cable to the Receiver unit terminal (CN13).
]1
9.5. Auto louver grille (Optional parts)
Connection method
• Connection terminal and jumper wires
Auto louver grille
terminal (CN11)
JM3
JM2
JM1
Jumper wires
• Cut Jumper wire JM2
• Wiring arrangement
Binder (Medium/Accessories)
Bushing (Accessory of optional parts)
Bind with this cable.
Auto louver grille cable
Bushing (Accessory
of optional parts)
Binder (Medium/Accessories)
Opening this
knockout hole
]1
9.6. Optional parts cable binding
Auto louver
grille cable
Remote controller
cable
Other optional
parts cables
Power supply
cable
Avoid touching the
ceiling with the wiring.
* Use an accessory of indoor unit or optional parts for binder.
** Use an accessory of optional parts for bushing.
Ceiling
Avoid covering the air
inlet with the wirings.
Binders*
Air inlet
Binder*
Knockout hole
Bushing**
• Do not bind the power supply cable and other cables together.
CAUTION
•
To protect the cable insulation after opening a knockout hole, remove any burrs from
the edge of the hole.
10. CUSTOMER GUIDANCE
Explain the following to the customer in accordance with the operating manual:
(1) Starting and stopping method, operation switching, temperature adjustment, timer, air
flow switching, and other remote controller operations.
(
2) Air filter removal and cleaning, and how to use the air louvers.
(3) Give the operating and installation manuals to the customer.
(4) If the signal code is changed, explain to the customer how it changed (the system
returns to signal code A when the batteries in the remote controller are replaced).
*(4) is applicable to using wireless remote controller.
9374815173-04_IM.indb 17
9/21/2011 1:45:28 PM
