Fujitsu AD11 Manual Download | Manualshive

Page: 41 / 64

background image

3 - 5

BIOS Setup

Anti-Virus Protection

This feature starts the virus scan tool to detect if boot virus in boot sector
of the first boot device when booting up.
The options are: Enabled, Disabled.

CPU Internal Cache

When enabled, improves the system performance. Disable this item when
testing or trouble-shooting. The options are: Enabled, Disabled.

External Cache

When enabled, supports an optional cache SRAM. This feature allows
you to disable the cache function when the system performance is un-
stable to run some software. The options are: Enabled, Disabled.

Quick Power On Self Test

When enabled, allows the BIOS to bypass the extensive memory test.
The options are: Enabled, Disabled.

First Boot Device

This feature allows user to select the boot device priority.
The options are: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2,
HDD-3, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, Dis-
abled.

Second Boot Device

This feature allows user to select the boot device priority.
The options are: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2,
HDD-3, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, Dis-
abled.

Third Boot Device

This feature allows user to select the boot device priority.
The options are: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2,
HDD-3, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, Dis-
abled.

Boot Other Device

This feature allows user to select the boot device priority.
The options are: Enabled, Disabled.

«
...
39
40
41
42
43
...
»

Summary of Contents for AD11

































































Reviews:

No comments

Related manuals for AD11

Brand: Balluff Pages: 62

Brand: Gigabyte Pages: 93

Brand: Zetex Pages: 8

Brand: IEI Technology Pages: 131

Brand: Biostar Pages: 51

Brand: ALi Confidential Pages: 24

Super 7 SY-5SSM

Brand: SOYO Pages: 86

xPico Wi-Fi Series

Brand: Lantronix Pages: 29

Brand: JETWAY Pages: 57

Brand: ASROCK Pages: 113

Brand: Texas Instruments Pages: 3

Brand: J&W Pages: 36

MPG Z390 GAMING PLUS

Brand: MSI Pages: 76

P67 PROFESSIONAL

Brand: ASROCK Pages: 9

Desktop Board D845GLVA

Brand: Intel Pages: 72

Brand: DFI Pages: 37

Brand: IEI Technology Pages: 161

Brand: ASROCK Pages: 145

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands