manualshive.com logo in svg

Fujitsu 985Tx, User Manual

Share
Download
Fujitsu 985Tx User Manual Download Page 80

S e c t i o n   T h r e e

70

Menu Field

Options

Default

Description

LPT Mode:

Bi-Directional; ECP, DMA 

Bi-Directional

Sets the parallel port mode: Bi-directional (Full Duplex); two-way

CHANNEL 1; ECP, DMA 

transfer of information between your notebook and a connected

CHANNEL 3; Output Only

parallel device. Example: if your notebook is connected to a 
parallel printer, it can transfer data and control information to the
printer, and the printer can transfer back status and error infor-
mation to your notebook; Output Only (Half Duplex); informa-
tion transferred in only one direction, from your notebook to the 
printer or similar device;ECP Mode allows communication with 
the ECP class of parallel I/O devices.

Diskette Controller:

Enabled; Disabled

Enabled

Enables and disables the floppy disk drive controller for both 
Multi-function bays and the external floppy disk drive port.

IDE Adapter:

Both; Disabled; Primary;

Both

Enables and disables the IDE adap ters for both Multi-function bays.

Secondary

PCI IRQ Routing:

Auto select;IRQ3; IRQ4; IRQ5; Auto select

When Auto select is active the BIOS will configure PCI interrupt

IRQ7;IRQ9; IRQ10; IRQ11;

routing automatically. When Disabled is set the BIOS will not 

Disabled

configure interrupt routing, if a particular IRQ is selected the PCI 
will always be that interrupt.

Internal Modem:

Enabled; Disabled

Enabled

Enables and disables the internal modem.

Table 3-5 Fields, Options and Defaults for the Integrated Peripherals Submenu

Summary of Contents for 985Tx


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands