S e c t i o n F i v e
142
2. You have a secured system requiring a
2. Make sure you have the right password.
password to load your operating system.
Enter the setup utility and verify the
Security settings and modify them as appro-
priate. (See Security Menu on pages 77–80.)
3. Internal hard drive was not detected.
3. Use the BIOS setup utility Main menu, IDE
Adapter submenu to try to auto detect the
internal hard drive. (See pages 59–63.)
An error message is displayed on the screen
1. Power On Self Test (POST) has detected
1. See the Power On Self Test (POST) Messages
during the notebook turn on (boot) sequence.
a problem.
(pages 148–150) to determine the meaning
and severity of the problem. Not all
messages are errors; some are simply
status indicators.
Your notebook appears to change setup
1. BIOS setup changes were not saved when you
1. Make sure you select
Save Changes
parameters when you start it.
made them and exited the BIOS setup utility
And Exit
when exiting the BIOS
thus returning to previous settings.
setup utility.
2. The BIOS CMOS hold-up battery has failed.
2. Contact your support representative for
repairs. This is not a user serviceable part
but has a normal life of 3 to 5 years.
Symptom
Possible Cause
Possible Solution
Summary of Contents for 985Tx
Page 6: ...T a b l e o f C o n t e n t s ...
Page 9: ...LifeB o ok 90 0 Series f rom Fu jit su P r e f a c e ...
Page 176: ...I n d e x ...
