manualshive.com logo in svg

Fujitsu 985Tx, User Manual

Share
Download
Fujitsu 985Tx User Manual Download Page 112

U s e r   I n s t a l l a b l e   F e a t u r e s

L i f e B o o k   9 0 0   S e r i e s   f r o m   F u j i t s u

103

To install a floppy disk drive externally, you must
purchase an optional external floppy disk drive.

To Connect An Optional 
External Floppy Disk Drive:

1. Close all files and exit all applications.
2. Turn off power to your notebook, close 

the display and remove the AC adapter.
(See pages 24–25 for more information.)

3. Open the external floppy disk drive port

cover on the left side panel of your notebook
(Figure 4-6), by gently pulling on the front
edge of the cover and swinging it toward the
back of your notebook.

4. Align the external floppy disk drive cable

with the smaller connector towards the body
of your notebook with the wide side of the
connector down. (Figure 4-6.)

5. Insert the connector firmly into the port on

your notebook until it clicks.

6. Insert the other cable connector into the

back of the external floppy disk drive and
press firmly until it clicks.

C A U T I O N

The floppy disk drive must be installed or
removed with the power off.

To Disconnect An Optional 
External Floppy Disk Drive:

1. Close all files and exit all applications 
2. Turn off power to your notebook, close 

the display and remove the AC adapter
(See pages 24–25 for more information.)

3. Squeeze the releases on the sides of the

external floppy disk drive cable connector
together. (The connector is next to the body
of your notebook.) (Figure 4-6.)

4. Pull the cable free.
5. Close the external floppy disk drive port

cover on your notebook by swinging it
toward the front of your notebook and
pressing it into the side of your notebook
until it latches.

6. Squeeze the releases, on the sides of the

external floppy disk drive cable connector
next to the body of your external floppy disk
drive, together.

7. Pull the cable free.

Port Cover

Connector
Release Buttons

External Floppy
Disk Drive

External Floppy

Disk Drive Port

Figure 4-6 External Installation of a Floppy Disk Drive

Summary of Contents for 985Tx


























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands