Fujitsu 985Tx, User Manual

Page: 105 / 185

C o n f i g u r i n g Y o u r L i f e B o o k 9 0 0 S e r i e s
L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u
95
To find out details about the hard drive and
the current Save-to-Disk space allocation,
do the following:
1.Go to the Start menu and select ShutDown.
2. Select
Restart the computer in
MS-DOS mode?
3. At the DOS prompt type
CD C:\Fujitsu
. (Make sure you put a
space between CD and C:and no space
between C: and \.)
4. Type
PHDISK /INFO
. (Make sure you put
a space before each of the /s.)
5. Press the Enter key.
6. The screen will display the size of the space
currently allocated to the Save-to-Disk func-
tion and other parameters about the space.
If you have had a read or w rite error when you
tried to perform a Save-to-Disk operation you
can re-allocate space to compensate for bad
blocks on your drive. To do this:
1.Go to the Start menu and select
MS-DOS prompt.
2. Type
PHDISK /REFORMAT /FILE
. (Make
sure you put a space before each of the /s.)
3. Press the Enter key.
4. The utility will re-create the Save-to-Disk file
called SAVE2DSK.BIN with the same usable
size and any bad blocks marked.
To find out how much space is needed to
perform the Save-to-Disk function with the
current memory configuration and how
much unused space is available on the internal
hard drive, do the following:
1.Go to the Start menu and select ShutDown.
2. Select
Restart the computer in
MS-DOS mode?
3. At the DOS prompt type
CD C:\Fujitsu
. (Make sure you put a
space between CD and C:and no space
between C: and \.)
4. Type PHDISK.
5. Press the Enter key.
6. The screen will display the amount
of disk space needed to perform the
Save-to-Disk function with the current
memory configuration.
C A U T I O N
Never use PARTITION in place of FILE
with the PHDISK Utility or you will
reformat your internal hard drive and all
data, applications and operating system
will be destroyed.