Fujitsu Siemens Computers SPARC Enterprise M4000, User Manual

Page: 68 / 162

3-6 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
The following example shows a display of the
showdomainstatus
(8) command.
■
Example: Display of information on all domains
3.1.3 Displaying System Board Information
The
showboards
(8) command displays system board information including the
domain ID of the domain to which the target system board belongs and various
kinds of system board status in list format.
Use the
showboards
(8) command before a DR operation to determine whether the
system board status permits DR operations, and to confirm the domain ID of the
domain to which the target system board belongs. The
showboards
(8) command is
also used after a DR operation to confirm system board status.
To change domain settings or register a system board in the DCL, use the
setdcl
(8)
command. To change PSB settings, use the
setupfru
(8) command.
Status Domain status
Powered Off Domain power is off.
Initialization Phase POST processing or OpenBoot PROM
initialization is in progress.
OpenBoot Executing
Completed Initialization by OpenBoot PROM is completed.
Booting/OpenBoot
PROM prompt Solaris OS is being booted or, due to the domain
shutdown or reset, the system is in the OpenBoot
PROM running state, or is suspended in the
OpenBoot PROM (
ok
prompt) state.
Running Solaris OS is running.
Shutdown Started Solaris OS is being shut down.
Panic State Solaris OS panic occurred.
XSCF> showdomainstatus
DID Status
00 Running
01 Powered Off
02 -
03 Running
TABLE 3-6
Items of Domain Information to be Displayed (Continued)
Display items Description