Fujitsu Siemens Computers SPARC Enterprise M4000, User Manual

Page: 87 / 162

Chapter 3 DR User Interface 3-25
3.2 Command Reference
This section lists the DR commands and other commands related to DR.
For details of the commands, refer to SPARC Enterprise M4000/M5000/M8000/M9000
Servers XSCF Reference Manual . For the DR commands, see Section 3.1, “How To Use
the DR User Interface” on page 3-1 .
Note – (Note 1)
Use of each command is restricted to selected administrators only. To use
each command, you must have appropriate administrator privileges. For details, refer to
SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual .
Note –
(Note 2)
This section does not list all commands related to DR. For other DR-related
commands, refer to SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference
Manual .
TABLE 3-16
DR Display Commands
Command name Function
showdcl
Displays the DCL and the domain status.
showdomainstatus
Displays domain status.
showboards
Displays system board information.
showdevices
Displays information about the CPUs, memory, and I/O devices on
system boards.
showfru
Displays PSB configuration information.
TABLE 3-17
DR Operation Commands
Command name Function
setdcl
Updates and edits the DCL.
setupfru
Sets the division type and memory mirror mode for PSB.
addboard
Adds a system board into a domain.
deleteboard
Deletes a system board from a domain.
moveboard
Moves a system board between domains.