Important notes
Safety
8
A26391-K96-Z100-2-7619
Safety
This notebook complies with the relevant safety regulations for data processing equipment. If you
have any questions, contact your sales outlet or our customer service center.
•
If it needs to be shipped, use the original packaging or other suitable packaging to protect it
from damage caused by mishandling.
•
If the notebook is brought into the installation site from a cold environment, condensation can
form. Before operating the notebook, wait until it is absolutely dry and has reached
approximately the same temperature as the installation site.
•
Ensure that the local line voltage is within the range of 100 V to 240 V.
•
During installation and before operating the notebook, observe the instructions on
environmental conditions in the Operating Manual for your notebook.
•
Only the power adapter and battery supplied may be used for supplying power to the notebook.
•
The power adapter is equipped with a safety-tested power supply cable.
If the power adapter is connected to wall outlet, it must be free-standing. The power adapter
may not be covered while it is in operation.
Do not place the power adapter on heat-sensitive material.
•
Ensure that the power socket on the power adapter or the grounded wall outlet is freely
accessible.
•
The ON/OFF switch does not disconnect the notebook from the line voltage. To disconnect the
line voltage completely, remove the power plug from the socket.
•
Lay all cables so that nobody can stand on them or trip over them. When connecting cables,
observe the relevant notes in the Operating Manual for your notebook.
•
No data transmission cable should be connected or disconnected during a thunderstorm.
•
Please ensure that no objects (e. g. necklaces, paperclips etc.) or liquids can get into the
interior of the device (this may cause an electrical shock or short circuit).
•
In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign
matter), switch off the device immediately, remove the power connector, remove the battery,
and contact your sales outlet or customer service center.
•
Only qualified technicians should repair the device. Unauthorized opening and incorrect repair
may greatly endanger the user (electric shock, fire risk).
•
When cleaning the Notebook, observe the relevant notes in the Operating Manual for your
Notebook.
•
Install only system expansions that satisfy the requirements and rules governing safety and
electromagnetic compatibility and relating to telecommunications terminal equipment. If you
install other expansions, you may damage the notebook or violate the safety regulations and
regulations governing RFI suppression. Information on which system expansions are suitable
can be obtained from the customer service center or your sales outlet.
•
Data cables for peripherals must be adequately insulated to avoid interference.
•
When connecting and disconnecting cables, observe the relevant notes in the Operating
Manual for your notebook.
