71
SECTION 2
Problem
Other computers
are not displayed when
the [Network Computer]
icon is double-clicked.
Possible Cause
The TCP/IP protocol is
not installed, or, the IP
address is not set
correctly.
No communication due
to poor radio signal.
Possible Solution
If the TCP/IP protocol is installed, do the
following to check the IP address:
1. Windows 98:
Click [Start]
→
[Programs]
→
[MS-DOS
Prompt].
Windows 2000:
Click [Start]
→
[Programs]
→
[Accessories]
→
[Command Prompt].
Windows XP:
Click [Start]
→
[All Programs]
→
[Accessories]
→
[Command Prompt].
2. Enter “ IPCONFIG” command, and
press [Enter].
(If your hard disk is C drive, enter
C:\>ipconfig)
Check that the IP address is correctly
displayed under the IP Address.
Example: IP address: 10.0.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.1.1
Shorten the distance between computers
or remove visible obstacles between
them, and retry the connection.
Laurel Sec 2 (064-75)
17/04/02, 9:53 AM
71