32
IMPORTANT
•
You should preferably power the computer from the AC adapter when frequently accessing
a CD or playing back a DVD-VIDEO.
•
To set a disc on the disc tray, align the center of the disc with the projection at the center
of the tray and push the disc down until it clicks into place.
Otherwise it may come off in the drive, causing damage to the disc tray and drive or the
disc itself.
•
When you are using a disc that starts automatically when it is loaded, don’t put your
computer into standby mode. If you place the computer into standby (suspending
operation) mode while using an auto-run CD, the CD will start twice when you resume
system operation (when you restore the operation at the point at which you suspended
operation), and this could cause the computer to malfunction. If you let the CD start
twice, exit all programs on the CD, and load it over again.
•
When data is being read, the CD/DVD runs at very high speeds and sometimes causes
vibration and hiss noise.
1
Press the CD eject button.
The disc tray pops out a little.
2
Pull out the tray gently.
CD eject button
2
1
Loading a disc
Laurel Sec 2 (030-36)
17/04/02, 9:49 AM
32