39
SECTION 2
5
Attach the expanded RAM module slot cover and secure it with screws.
Reattach the cover removed in Step 3.
IMPORTANT
•
If memory is not installed properly, the message “Expanded Memory Error” will be
displayed in English or nothing will be displayed on the screen when you first turn on
your PC after installing the memory. If this happens, turn off the main switch of your PC,
and remove and reinstall the memory correctly.
❑
Removing memory
1
Turn off your PC and disconnect the AC adopter from it.
2
Close the LCD panel and place your PC upside down.
3
Remove two screws and detach the expanded RAM module slot cover.
Detach the expanded RAM module slot cover on the bottom of the PC.
4
Remove the memory.
Detach the RAM module from the slot while opening in opposite directions both tabs fastening
the RAM module, as shown in the figure below.
Expanded RAM
module slot cover
Expanded RAM
module slot cover
Tab (upper slot)
Tab (lower slot)
Expanded RAM module slot (DIMM2)
Laurel Sec 2 (037-41)
17/04/02, 9:52 AM
39