background image

CONNECT2AIR™ WLAN AP-600RP-USB

 

 

Page 45 / 62

  

8.5 Advanced 

Settings 

8.5.1 Virtual Server 

The router built into the AP-600RP-USB allows specific ports – and therefore their associ-
ated services – to be enabled for communication for particular clients. In this way, local 
servers or other resources can be released for communication. This is done by selecting a 
client in the virtual server (specific IP address) and defining the port to open. All requests 
sent to this port are forwarded through the IP address to the specified computer. 
 
The virtual server acts as a selective "guard" on the WAN side (Internet) in that it grants 
access to the local network (WLAN/LAN) to specified services, and denies all other ser-
vices this right. Each service (used synonymously in this context for a port and the associ-
ated application) must be assigned to a particular IP address in the local network so that 
packet forwarding is possible. 
 

Service Function 

TCP 

UDP 

AUTH Authentication 

Service 

113 

113 

BOOTPC 

Bootstrap Protocol Client 

 

67 

DNS 

Domain Name Server 

 

53 

FTP 

File Transfer Protocol 

21 

 

HTTP 

Hyper Text Transfer Protocol 

80 

 

NETBIOS-SSN Netbios 

Session 

Service 

139 

 

NNTP 

Network News Transfer Protocol 

119 

 

NPP Network 

Printing 

Protocol 

92 

 

NTP 

Network Time Protokol 

123 

 

POP3 

Post Office Protocol V3 

110 

 

PPTP 

Point to Point Tunneling Protocol (VPN) 

1723 

 

SMTP 

Simple Mail Transfer Protocol 

25 

 

SNMP 

Simple Network Management Protocol 

 

161 

Telnet Terminal 

Emulation Protocol 

23 

 

TFTP 

Trivial File Transfer Protocol 

 

69 

 
For example, if you have an FTP server (port 21) at 192.168.1.13, a web server (port 
8080) at 192.168.1.12, and a VPN server at 192.168.1.14 (port 173), you need to make 
the following entries in the virtual server mapping table: 
 

 

 
Another example configuration with a WEBcam can be found in Section 8.4.15 DDNS 
(Dynamic DNS). 
 

Application: 

Use a comma (,) or dash (-) if more than one port is to be added – for example: 20, 21 or 
20–25 or 20, 25–30, 50. Up to 50 entries can be added to the table. Port ranges are also 
listed individually in the table. 

 
 

Summary of Contents for CONNECT2AIR WLAN AP-600RP-USB
































































Reviews: