CONNECT2AIR™ WLAN AP-600RP-USB
Page 16 / 62
6.1 AP-600RP-USB with ADSL Router
( 1 ) ADSL Router
( 2 ) AP-600RP-USB
( 3 ) Notebook
WAN: PPPoE over ADSL
LAN:
static IP: 192.168.1.1
DHCP on: 192.168.1.10 - 90
GW:
192.168.1.1
DNS:
auto
WAN: no ISP
LAN:
static IP: 192.168.1.254
DHCP disabled
Routing: off (cable from Router
connected to the LAN
interface)
SSID: CONNECT2AIR
TCP/IP: get IP and DNS address
automatically
SSID: CONNECT2AIR
Data Rate:
auto
Connecting the devices to the AP-600RP-USB:
Connect the ADSL Router to one of the LAN port, not to the WAN port. Additional network-
ing devices like network printers, servers or scanners can be plugged to one of the free
LAN ports and will be integrated in the IP segment of 192.168.1.X.
Installation Note
The AccessPoint as well as the ADSL Router have routing capabilities. Therefore it is
suggested to operate the AccessPoint only as a Wireless Bridge. Connecting the ADSL
Router to one of the LAN ports will put the AccessPoint into the bridging mode. The
network management will therefore also be handled by the ADSL Router (DHCP, etc.).
ADSL Router:
- DHCP Server
- managing the PPPoE session
AP-600RP-USB:
- handling the wireless LAN (WLAN) access
5
4
5
1
X
2
1
3
4
3
Summary of Contents for CONNECT2AIR WLAN AP-600RP-USB
Page 1: ......
