Fujitsu Siemens Computers AMILO Pi 153 SERIES, Getting Started, Page: 23 / 132

Troubleshooting and tips
The external monitor is blank or the image is unstable
The wrong external monitor has been selected or the wrong screen resolution has been set for the
application programme.
► End the application programme under Windows with Alt + F4 . If the fault continues to occur
after ending the programme, switch over to the notebook's internal LCD screen with Fn +
F4 . Change the following setting:
► Set the screen resolution: Change these settings under Start – (Settings) – Control Panel –
Appearance and Personalization – Personalization: Adjust screen resolution . to set the required
screen resolution.
► Select monitor: Right click on the desktop. From the menu click on Personalize – Display Settings
and select monitor type 1 or 2 and then select the correct screen under Advanced settings –
Monitor .
The notebook cannot be started
The battery is not installed correctly
► Switch the notebook off.
► Check whether the battery is installed correctly in its compartment.
► Switch the notebook on.
The battery is dead
► Charge the battery.
Or
► Install a charged battery.
Or
► Connect the mains adapter to the notebook.
The mains adapter is not connected correctly
► Switch the notebook off.
► Check whether the mains adapter is connected correctly to the notebook.
► Switch the notebook on.
The notebook stops working
The notebook is in Standby or Suspend mode
► Reactivate the notebook by pressing a key (Standby mode) or by switching it back on (Suspend
mode).
An application programme has caused the malfunction
► Close the application programme or restart the notebook by switching it on/off or with a warm
boot.
The battery is dead
► Charge the battery.
10600790867, edition 1 English - 15
Downloaded from LpManual.com Manuals