Fujitsu Siemens Computers AMILO Pi 153 SERIES, Getting Started, Page: 15 / 132

Preparation for use and operation
► Connect the mains adapter cable (1) to the DC jack (DC IN) of the notebook.
► Connect the power cable (2) into the mains adapter.
► Plug the power cable (3) into a mains outlet.
The battery will charge.
Switching on the notebook for the first time
!
When you switch on your notebook for the first time, the supplied software is installed and
configured. Due to the fact that this installation procedure must not be interrupted, you
should set aside enough time for it to be fully completed and connect the notebook to the
mains outlet using the mains adapter.
During installation, the notebook may only be rebooted when you are requested to do so!
To make it easier to set your notebook up, the operating system is preinstalled on the hard disk and
the manuals are saved there.
► Switch the notebook on (see " Fehler! Verweisquelle konnte nicht gefunden werden. ").
► During installation, follow the instructions on screen.
Consult the operating system manual if anything is unclear about the requested input data.
If a Windows operating system is installed on your notebook, you will find additional
information on the system as well as the drivers, help programs, updates, manuals, etc. on
your notebook or on the "Drivers & Utilities" CD/DVD or on our website (see "
Fehler!
Verweisquelle konnte nicht gefunden werden. ").
i
10600790867, edition 1 English - 7
Downloaded from LpManual.com Manuals