14
INSTALLATION (continued)
Mounting procedure for BUF-07P (Ceiling Mounting)
1
Put 4 all thread rods (
∅
1/2'' anchor
bolt, not supplied) into the corner holes
of the mounting bracket, and secure
them using washers, spring washers,
and nuts. Place the mounting bracket
on the beam of the ceiling as shown.
2
Place the range hood as shown and
detach the left and right filters by loosening
2 screws. Then remove 5 screws fixing the
front cover and detach the front cover.
Note
The mounting bracket should
be securely fastened at this
point to simplify installing the
range hood later.
Beam
Mounting bracket
Washer
*
Mounting Bracket
*
Not supplied
Spring-washer
*
Nut
*
Front cover
Loosen 2 screws
to remove the filter.
Filter
3
Remove the sound-absorbing boxes.
(1) Remove the two screws holding
each front sound-absorbing boxes
(2 pcs), pull the tab at the top of
the box out of the slit, and remove
the box.
Sound-absorbing box
(front)
