9
INSTALLATION (continued)
2. Range Hood Mounting
CAUTION
• The liner shape illustrated in this installation manual is only for reference.
• When the liner is installed in the wooden hood, the inside of the wooden hood placed
above the cooking surface must be fully covered by the metal barrier including bottom
edges. Select a suitable liner and metal barrier according to the size and shape of the
wooden hood and install properly.
• The liner should be installed tightly. If the liner installation is not correct, the range hood
unit may become detached and fall.
CAUTION
• Wear working gloves to avoid injury.
2
The range hood unit should be
mounted to a liner which has the
dimensions stated in diagram. Install
the liner securely after checking that
the opening size of the liner is the
same as the figure shown.
Note
During installation, be careful not to touch the fan switches.
If two or more switches are pushed at once, it may cause
failure to the motors.
26"
15-15/16"
25-3/16"
9-13/16"
min.
11/16"
4-
∅
1/4"
FWD
Switches & lamps side
Center line
Front
Liner
Liner cutout
Holes for mounting
range hood
Mounting procedure for BUF-07W (Wall Mounting)
*For the procedure to mount BUF-07P (Ceiling Mounting), see page 14.
1
Before mounting, make sure that a wood panel for
mounting the range hood is fixed on the wall where
the range hood is installed.
Note
If no wood panel is found on the wall, be sure to
prepare one referring to the figure.
Liner
Fan unit
Wall
3/4" thickness
wood panel is required
