Fujiiryoki HWP-77EN, Instruction Manual

Page: 19 / 76

19
Method of
mounting
How to use
Using alkaline ionized water, acidic water and purified water
Note
●
●
As water becomes turbid immediately after water supply work has been carried out,
set the water selection lever to the “Raw” side and wait to use until
the water becomes transparent. (Clogging of the filter may result.)
Do not use with the power plug removed from the power outlet.
(Because flow rate for judgment of filter life and number of operating days cannot be counted,
there may occur an error in filter replacement period.)
Do not use while the “Preparing
（準備中）
” mark on the LCD monitor flashes.
- The “Preparing （準備中） ” mark continuously flashes until retained water in the main body
is completely flowed.
- Flashing time depends on use interval or flow rate.
Make sure to carry out when passing water for the first time after installation.
continued
●
●
●
●
●
Pass water once before inserting the power plug into the power outlet.
When water comes out from the pressure valve of the corporation stop, decrease flow rate
because water pressure is excessively high.
When water does not come out, confirm that the water selection lever has been completely switched.
Switch the water selection lever after stopping water flow. (Failure may result.)
Set the water selection lever to the
“Ion” side and open the cock
of tap water.
1
Pass water until the water becomes
transparent.
2
Remove the filter cover to confirm that the filter is installed.
Prohibited