Fujiiryoki HWP-77EN, Instruction Manual

Page: 17 / 76

17
Method of
mounting
Fix the drain hose to a sink with a
suction cup.
Delivery pipe
Screw in the delivery pipe to the root.
Drain hose
（ Thin hose ）
●
Installation of this part.
●
Inserting part
Delivery pipe
●
●
●
Installation of the delivery pipe
Installation of the drain hose
●
When bending the delivery pipe after installation, hold the root and bend the pipe with your
free hand.
Note
Do not extend the water outlet with a hose. (Water leakage and failure may result.)
Do not unnecessarily screw in because the inserting part is made of plastic.
(Water leakage and failure may result.)
Prohibited
Suction cup
Difference in height
15cm or more
Less than 40cm
●
●
●
●
●
The difference in height between the
end of the delivery pipe and the end of
the drain hose shall be 15cm or
more, and less than 40cm.
(In order to obtain the appropriate pH value)
Set the end of the drain hose below
the bottom face of the main body.
If the drain hose is excessively long, cut it
for use.
Prevent the drain hose from being bent.
Do not extend the drain hose.
Note
continued