V-301 series Operating Instructions Ver1.02E
26
H
L
1 Press down the table so that the pressure
adjusting screw can be seen from the
adjusting hole on the frame cover.
2 Adjust the sealing pressure by turning the
adjusting screw with Phillips screwdriver.
3 Turn the screw counter-clockwise (toward
"H") to increase the sealing pressure.
4 Turn the screw clockwise (toward "L") to
decrease the sealing pressure.
The proper sealing pressure is different depending on the type of film used.
When the first use or sealing condition is not good after changing the film, adjust the sealing
pressure.
13 Adjust the sealing pressure
Turn counter-
clockwise ( L )
to increase
pressure
Turn counter-
clockwise ( H )
to increase
pressure
Press down the table completely.
Warning
It is very dangerous to adjust the sealing
pressure with the power on, as the micro-
switch may inadvertently be activated.
Please unplug the power cord before
performing this operation
Caution
Excessively tightening or loosening the
adjustment screw may damage certain
parts or cause them to come apart.
Please use caution when adjusting the
screw.