FujiFilm ZPA, Service Manual

Page: 30 / 45

22
TN5A1191-E
3.3 Range limit
z
You can switch on and off of the limiter applied on the measured value used for O
2
correction and
for calculating the moving average.
ON: indication and output of the measured value is limited up to 110% of FS
OFF: the measured value is indicated and transmitted up to limit of the display.
z
The default setting is “ON”.
Factory mode > 12. Other parameters > Range limit
Factory mode initial screen
The cursor is in 12.
ENT ESC
Point the cursor to “Range limit” and press the
ENT
key.
The setpoint (“ON” or “OFF”) is inverted.
ENT ESC
By using the or key, switch between “ON” and
“OFF”, and press the
ENT
key. If you want to cancel the
change, press the
ESC
key before pressing the
ENT
key.
(CEVQT[/QFG
1VJGTU 4CPIGNKOKVKUWUCDNG
1((
10
'0)
%[NKPFGT
/1
10
<'41NKOKV
4CPIGNKOKV
#10Q
.CPIWCIG
<'41ICU
2TQVQEQN
8CTKGF4CPIG
&+10Q