FujiFilm X-H1, Owner'S Manual

Page: 95 / 163

227
P
eripherals and Optional A
c
c
essories
10
External Flash Units
SYNC TERMINAL
Adjust settings for fl ash units connected via the sync terminal.
SYNC TERMINAL is displayed if the EF-X8 is lowered and either
no fl ash unit, or an incompatible fl ash unit, is mounted on the
hot shoe.
ADJUST END
MODE
SYNC TERMINAL
Setting Setting Description Description
A
Flash control mode
Choose from the following options:
•
M : A trigger signal is transmitted via the hot shoe X contacts
when a picture is taken. Choose a shutter speed slower than
the sync speed; even slower speeds may be required if the
unit uses long fl ashes or has a slow response time.
•
D (OFF) : The trigger signal is disabled.
B
Sync
Choose whether the fl ash is timed to fi re immediately after
the shutter opens (
H / 1ST CURTAIN ) or immediately before
it closes ( I / 2ND CURTAIN ). 1ST CURTAIN is recommended in
most circumstances.
The Sync Terminal
Use the sync terminal to connect fl ash units
that require a sync cable.