110
The Setup Menu
V
V
SENSOR CLEANING
SENSOR CLEANING
Remove dust from the camera image sensor.
•
OK
: Clean sensor immediately (
P
xi).
•
WHEN SWITCHED ON
: If this option is selected, sensor cleaning will be performed when the camera turns on.
•
WHEN SWITCHED OFF
: If this option is selected, sensor cleaning will be performed when the camera turns off (sensor cleaning is
not however performed if the camera turns off in playback mode).
R
Dust that can not be removed using sensor cleaning can be removed manually (
P
134).
t
t
SAVE DATA SET-UP
SAVE DATA SET-UP
Adjust fi le management settings.
Option
Option
Description
Description
FRAME NO.
FRAME NO.
New pictures are stored in image fi les named using a four-digit fi le number assigned by
adding one to the last fi le number used. The fi le number is displayed during playback as
shown at right.
FRAME NO.
controls whether fi le numbering is reset to 0001 when a new
memory card is inserted or the current memory card is formatted.
Frame number
100-0001
Directory
number
File
number
Option
Option
Description
Description
CONTINUOUS
CONTINUOUS
Numbering continues from the last fi le number used or the fi rst available fi le number, whichever is
higher.
Choose this option to reduce the number of pictures with duplicate fi le names.
RENEW
RENEW
Numbering is reset to 0001 after formatting or when a new memory card is inserted.
R
If the frame number reaches 999-9999, the shutter release will be disabled (
P
141).
R
Selecting
R
RESET
(
P
106) sets
FRAME NO.
to
CONTINUOUS
but does not reset the fi le number.
R
Frame numbers for pictures taken with other cameras may diff er.
SAVE ORG IMAGE
SAVE ORG IMAGE
Choose
ON
to save unprocessed copies of pictures taken using
B
B
RED EYE REMOVAL
.
EDIT FILE NAME
EDIT FILE NAME
Change the fi le name prefi x. sRGB images use a four-letter prefi x (default “DSCF”), Adobe RGB images a three-
letter prefi x (“DSF”) preceded by an underscore.
